Chase Bays Tucked Aluminum Radiator

Overview

·       All Aluminum construction

·       Leak tested

·       Mounts underneath your core support for more clearance and hidden look

·       Optional outlets, -16AN or OEM style 

·       Includes mounting hardware 

·       Upper and Lower outlets can be placed on the left or right side of the end tanks

·       28 x 3 x 10

This radiator was initially designed for 2 reasons. The first reason was to find a solution to clearance issues. And the second was to make a radiator that functions great that you can hardly even see. Cooling better while downsizing. That was the challenge. This radiator is smaller in height, and some may think it doesn’t cool as well.

There is more here than meets the eye.

This radiator is a dual pass design. This simply means the coolant passes through TWO times instead of ONE. Which, even more simply put means TWICE the cooling and half the size. Both inlets are on the same side of the radiator and a plate is welded inside between the two inlets. The radiator has two L brackets on each side that you bolt to your core support. This radiator doesn’t use any of the OEM radiator mounting points, and it’s easier to install and un-install.

The next step is fill point and hoses. Hoses first. For hoses you have the option of -16AN or OEM style outlets. If you choose -16AN, let us provide you with the hose and fittings. We can even assemble it for you to your specs. And if you need assistance figuring out how to set it up, we’re just an email and a phone call away. If you go with OEM style hoses sometimes the stock upper or lower hose will work, usually not both. For the outlets left un-hosed our recommendation is to just find another oem hose that will work, we can help you out with this too.

Now for the fill point. Since the top of our radiator sits about a foot lower than the OEM, we have to make a new fill point. The first step is getting an inline filler neck, listed below are some links to the inline filler necks that we sell. The way you setup the filler neck could make your hose selection easier. We can help you with this too, we’re full of ideas. You will also need (2) 8” inch Slim Fans for this radiator. We didn’t forget to help you with that either, we have the option to add it to your order at the bottom of this page!