Chase Bays Hydro Handbrake
$319.99
- Fits under your console — Side-mounted master cylinder, over 2" shorter than popular options
- Zero shimmy — Tight machining tolerances plus an optional pre-tapped steel reinforcement plate
- Easy on the arm — Comfort grip and a tuned handle ratio lock the rears with less effort
- No charts, no guessing — Universal 3/4" bore works with every chassis and caliper setup
- Complete kit — All -3AN outlet fittings included. Inline or stand alone, pull-up or pull-towards
For the Forum Crowd & Readers Full technical breakdown
The Chase Bays Hydraulic Handbrake design has many unique features. We've carefully combed through every detail of this product to provide the most compact, stable, comfortable, and simple solution for adding a hydro e-brake to your car.
Designing our Hydro E-Brake
When we set out to design the perfect handbrake, we took in all the aches and pains of other performance handbrakes, and here's what found. They were too bulky, had poor design, created a large amount of play or shimmy in the handle, extremely uncomfortable on the hand, too hard to pull, and incomplete package (aka missing important components). If you've experienced these issues or you want to avoid them, then you're on the right page. Read on to learn how we fixed these common issues.
Compact
By using a side mount or sideways mounted master cylinder, we've created the most compact base and master cylinder mounting available for hydraulic e-brakes. We wanted the ability to install under factory center consoles, and others on the market do not allow for this. Ours is over 2" inches shorter than the current popular options. The increased aesthetics of its minimalism is a nice plus too!
Stability
This was huge for us when designing a handbrake. Other hydraulic handbrakes shimmy in all directions from poor machining tolerances (which creates longer throw from wasted space), and the entire assembly flexes on the tunnel since they lack the proper installation hardware. The Chase Brake Hydraulic Handbrake has zero shimmy on the handle.
The factory trans tunnel metal flexes too much, so we're offering a steel plate that matches the handbrake base shape. It's even pre-tapped for the supplied hardware. We recommend stitch-welding this on. The Hydro Handbrake needs to be supported 100% underneath with a steel base if our Reinforcement Plate isn’t used, and any overhang should be supported from underneath so that the Reinforcement Plate or custom base cannot flex.
Modular
We have designs for stand-alone and inline style MC, with the handle being reversible for Pull-Up or Pull-Towards. No one else is providing a thought-out one-off solution like ours. Instead, all we see is the same off-the-shelf base with uncomfortable machined handles. Which leads us to our next feature...
Comfort & Master Cylinder Size
If you've used other handbrakes besides ours, then you probably experienced a sore hand. We have implemented a cylinder shape comfort grip atop the Chase Bays Hydro Handbrake handle, and it's guaranteed to leave your hand happy instead of sore.
In addition to this, our handbrake requires minimal force to lock the rear calipers. Nearly every handbrake we see uses a Wilwood base that's designed for a foot-activated pedal, not a hand-activated handle. Our legs are stronger than our arms. Therefore the entire package has to be designed around that.
We've learned a lot about pedal ratios (which is the distance between the swing and master cylinder connection plus the length of the pedal/handle) with our other product, the Chase Bays Brake Booster Delete. We designed a manual brake master cylinder setup that stops the car on a dime and doesn't require additional leg effort.
On our handbrake, we tested many theories and landed on what we know is the perfect pedal/handle ratio for a minimal throw to lock and easy on the arm. Every master cylinder we provide is a 3/4 size bore, and it will work with every chassis and caliper setup you throw at it. So if you have to sit there reading a chart on how to set up your calipers with your master cylinder size, you're doing it wrong.
Complete
This does include all 3AN outlet fittings needed and has the option for the mounting plate.
The reservoir is formed from extreme high heat resistant Polypropylene, the same material used on our race proven Dual Piston Manual Brake. These used to be solid aluminum but after plenty of input we changed to a visible Motorsport grade material so you can easily see fluid levels. We love the change! The reservoir cap is billet aluminum with proper internal diaphragm, anodized in our signature Chase Bays semi-gloss black...laser etch with Chase Bays 360º logo.
Inline to Stand Alone Conversion
We know how drift cars progress, so we always push to make things seamlessly modular. It is so easy to convert your Chase Bays Inline Handbrake to Stand Alone after your purchase. CLICK HERE FOR THE CONVERSION KIT

Bulky. Wobbly. Hard to pull.
Most hydro handbrakes are too big to fit under the console, wobble in your hand, flex the tunnel when you yank them and leave your hand sore after a session. Here's how we fixed every one of those.
Tap to enlarge
- 01Side-mounted master cylinderThe most compact base on the market, over 2" shorter than popular options. Fits under factory center consoles.
- 02Zero handle shimmyTight machining tolerances mean no wasted play, so every bit of pull goes to the calipers.
- 03Steel reinforcement platePre-tapped and shaped to the base, it stops the factory tunnel from flexing under hard pulls.
- 04Handle ratio built for an armMinimal throw to lock the rears, with low arm effort. Engineered from what we learned on our Brake Booster Delete.
- 05Comfort gripA cylinder-shaped grip that's easy on your hand, lap after lap.
- 06Universal 3/4" boreWorks with every chassis and caliper setup. No sizing charts.
Compact, solid and easy to pull
Real builds. Real reviews.
Complete, not half a kit

- 01Hydro handbrake: base, handle and side-mounted 3/4" master cylinder
- 02Comfort grip
- 03All -3AN outlet fittings
- 04Mounting hardware
- 05Reservoir (Stand Alone) and reinforcement plate (if selected)
The numbers
- Master cylinder
- 3/4" bore, side-mounted
- Configurations
- Inline / Pass-Thru or Stand Alone
- Handle
- Reversible: Pull-Up or Pull-Towards
- Footprint
- Over 2" shorter than popular options
- Outlet fittings
- -3AN, included
- Grip
- Cylinder-shaped comfort grip
- Reservoir (Stand Alone)
- High-heat polypropylene, billet aluminum cap with diaphragm
- Finish
- Semi-gloss black anodized
- Reinforcement plate
- Pre-tapped steel, optional (+$20)
Pick your setup.
- Step 1: Master cylinder
- Inline / Pass-ThruRuns through your existing rear calipers. Most common setup.
- Stand AloneFor a dedicated second set of rear calipers. Includes its own reservoir (+$40).
- Step 2: Handle
- Pull-TowardsHandle pulls back toward you.
- Pull-UpHandle pulls straight up.
- Step 3: Reinforcement plate
- Add the platePre-tapped steel plate that stops tunnel flex. Recommended (+$20).
- No plateOnly if you're building your own fully supported steel base.